120-OSALINE KÄSITÖÖRIISTA KOMPLEKT, Makita
Hind:
125,00 €
Komplekt sisaldab:
- Padrun 1/4” 13 tk: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
- Padrun 3/8” 14 tk: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 mm
- Padrun "E" 1/4" 5 tk: 4, 5, 6, 7, 8 mm
- Padrun 3/8" 6 tk: 10, 11, 12, 14, 16, 18 mm
- Padruni adapter 2 tk: 1/4” & 1/2”
- Kardaan liigend padrunitele 2 tk: 1/4” & 3/8”
- Pikendus 3/8” 2 tk: 3/8” x 50 mm, 3/8” x 150 mm
- Pikendus 1/4” 2 tk: 1/4” x 50 mm, 1/4” x 150 mm
- Silmuslehtvõtmed 7 tk: 8, 10, 11, 12, 13, 14, 15 mm
- Kuuskantvõtmed 8 tk: 1,5, 2, 2,5, 3, 4, 5, 6, 8 mm
- Kruvikeeraja otsik 25 mm 50 tk: 2 x PH0, 2 x PH1, 3 x PH2, 3 x PH3, 2 x PZ0, 2 x PZ1, 3 x PZ2, 3 x PZ3, T8, T9, T10, 2 x T15, T20, T25, T27, T30, T40, T8H, T9H, T10H, 2 x T15H, T20H, T25H, T27H, T30H, T40H, H3H, H4H, H5H, H6H, SL0.5x3.0, SL0.8x4.0, SL0.8x5.0, 2 x SL1.0x5.5, SL1.0x6.0
- Narre 3/8"
- Kruvikeeraja 1/4"
- Kruvikeeraja otsiku ühendus "DR" 1/4"
- Küünlavõti “DR” 1/2” (16mm & 21mm)
- Adapter 1/4" x 50mm
- Adapter 3/8" x50mm
- magnetotsa hoidik 1/4 ”x 60mm
- otsikuhoidja pikkadele kruvidele 1/4” x 80mm
- Padrun 1/4” 13 tk: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
- Padrun 3/8” 14 tk: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 mm
- Padrun "E" 1/4" 5 tk: 4, 5, 6, 7, 8 mm
- Padrun 3/8" 6 tk: 10, 11, 12, 14, 16, 18 mm
- Padruni adapter 2 tk: 1/4” & 1/2”
- Kardaan liigend padrunitele 2 tk: 1/4” & 3/8”
- Pikendus 3/8” 2 tk: 3/8” x 50 mm, 3/8” x 150 mm
- Pikendus 1/4” 2 tk: 1/4” x 50 mm, 1/4” x 150 mm
- Silmuslehtvõtmed 7 tk: 8, 10, 11, 12, 13, 14, 15 mm
- Kuuskantvõtmed 8 tk: 1,5, 2, 2,5, 3, 4, 5, 6, 8 mm
- Kruvikeeraja otsik 25 mm 50 tk: 2 x PH0, 2 x PH1, 3 x PH2, 3 x PH3, 2 x PZ0, 2 x PZ1, 3 x PZ2, 3 x PZ3, T8, T9, T10, 2 x T15, T20, T25, T27, T30, T40, T8H, T9H, T10H, 2 x T15H, T20H, T25H, T27H, T30H, T40H, H3H, H4H, H5H, H6H, SL0.5x3.0, SL0.8x4.0, SL0.8x5.0, 2 x SL1.0x5.5, SL1.0x6.0
- Narre 3/8"
- Kruvikeeraja 1/4"
- Kruvikeeraja otsiku ühendus "DR" 1/4"
- Küünlavõti “DR” 1/2” (16mm & 21mm)
- Adapter 1/4" x 50mm
- Adapter 3/8" x50mm
- magnetotsa hoidik 1/4 ”x 60mm
- otsikuhoidja pikkadele kruvidele 1/4” x 80mm
Sarnased tooted
Läbiva avaga padrunite ning otsikute komplekt. 72H tirrpea kalle 15°. Reeversiga. Otsikud nikkelkattega. Väga kompaktne ja praktiline. Plastkarbis.
Komplekt sisaldab:
Silmus-silmusvõti tirrmehhanismiga
Läbiva avaga padrun 5-6-7-8-9-10-11-12-13-14 mm
Ristotsik PH0-PH1-PH2-PZ0-PZ1-PZ2
Lapikotsik 4-6 mm
Kuuskantotsik 3-4-5-6 mm
Torx otsik T10-T15-T20-T25-T27-T30-T40
Komplekt sisaldab:
Silmus-silmusvõti tirrmehhanismiga
Läbiva avaga padrun 5-6-7-8-9-10-11-12-13-14 mm
Ristotsik PH0-PH1-PH2-PZ0-PZ1-PZ2
Lapikotsik 4-6 mm
Kuuskantotsik 3-4-5-6 mm
Torx otsik T10-T15-T20-T25-T27-T30-T40
Tootekood: 918.3050
, Laoseis: Tellimisel
79,00 €
Padrunid 1/2" kasteistkant 15tk: 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1.1/16, 1.3/16, 1.1/4
Padrunid 1/2" kaksteistkant pikad 5tk: 9/16, 5/8, 11/16, 3/4, 13/16
Padrunid 1/2" 8tk: E10. E11, E12, E14, E16, E18, E20, E24
Narre 1/2" 72hammast 1tk
Pikendused 1/2" 2tk: 5", 10"
Libiseva T-saba 1/2" pea
Kardaan 1/2"
Küünlapadrunid 1/2": 5/8, 13/16
1/2" otsakuhoidija padrun 5/16" otsakutele
Padrunid 1/4" kuuskant 10tk :5/32, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16
Padrunid 1/4" kuuskant pikad 8tk: 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2
Padrunid 1/4" 5tk: E4, E5, E6, E7, E8
Narre 1/4" 72hammast 1tk
Pikendused 1/4" 2tk: 2", 4"
1/4" libisev t-saba 1tk
Kruvikeeraja 1/4" tapiga 1tk
Kardaan 1/4"
1/4 otsakupadrunid 18tk: SL4, SL5,5, SL8, HEX1/8, 5/32, 3/16, 7/32, T8, T10, T15, T20, T25, T27, T30, PZ1, PZ2, PH1, PH2
L-kuuskandid 3tk: 1,5mm, 2mm, 2,5mm
Otsikud 5/16" 17tk: SL8, SL10, SL12, HEX7, 8, 10, 12, 14, T40, T45, T50, T55, T60, PZ3, PZ4, PH3, PH4
Padrunid 1/2" kaksteistkant pikad 5tk: 9/16, 5/8, 11/16, 3/4, 13/16
Padrunid 1/2" 8tk: E10. E11, E12, E14, E16, E18, E20, E24
Narre 1/2" 72hammast 1tk
Pikendused 1/2" 2tk: 5", 10"
Libiseva T-saba 1/2" pea
Kardaan 1/2"
Küünlapadrunid 1/2": 5/8, 13/16
1/2" otsakuhoidija padrun 5/16" otsakutele
Padrunid 1/4" kuuskant 10tk :5/32, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16
Padrunid 1/4" kuuskant pikad 8tk: 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2
Padrunid 1/4" 5tk: E4, E5, E6, E7, E8
Narre 1/4" 72hammast 1tk
Pikendused 1/4" 2tk: 2", 4"
1/4" libisev t-saba 1tk
Kruvikeeraja 1/4" tapiga 1tk
Kardaan 1/4"
1/4 otsakupadrunid 18tk: SL4, SL5,5, SL8, HEX1/8, 5/32, 3/16, 7/32, T8, T10, T15, T20, T25, T27, T30, PZ1, PZ2, PH1, PH2
L-kuuskandid 3tk: 1,5mm, 2mm, 2,5mm
Otsikud 5/16" 17tk: SL8, SL10, SL12, HEX7, 8, 10, 12, 14, T40, T45, T50, T55, T60, PZ3, PZ4, PH3, PH4
Tootekood: 129A-103-4
, Laoseis: Laos
159,00 €
Komplekt sisaldab laialt levinud autonduse eripadruneid. Kaetud on automargid Honda, Nissan, Opel, Renault, PSA, Toyota jne. Padrunid on valmistatud löögikindlast CrMo eriterasest. Metallsiinil. Fosfaaditud pinnatöötlus. Riputuspakendis.
Komplekt sisaldab:
10S kantpadrun 1/2" Toyota
6S kantpadrun 1/2" Nissan ja Renault siduritele
8S kantpadrun 1/2" Nissan nukk- ja tasakaalustusvõllile
12S kantpadrun 1/2" Nissan plokikaanele
8TS kantpadrun (3-külge) 1/2" Nissan tasakaalustusvõllile
10 mm 5-kant padrun pidurisüsteemidele (sadulad)
12 mm 5-kant padrun Nissan kütusepumbale
14 mm 5-kant padrun Opel ja Smart
19 mm 5-kant padrun Opel, Renault, Peugeot, Citroen pidurisüsteemidele
20 mm 10-kant padrun Honda Civic õõtshoob
Roostevabast terasest padrunihoidjatega metallsiin
Komplekt sisaldab:
10S kantpadrun 1/2" Toyota
6S kantpadrun 1/2" Nissan ja Renault siduritele
8S kantpadrun 1/2" Nissan nukk- ja tasakaalustusvõllile
12S kantpadrun 1/2" Nissan plokikaanele
8TS kantpadrun (3-külge) 1/2" Nissan tasakaalustusvõllile
10 mm 5-kant padrun pidurisüsteemidele (sadulad)
12 mm 5-kant padrun Nissan kütusepumbale
14 mm 5-kant padrun Opel ja Smart
19 mm 5-kant padrun Opel, Renault, Peugeot, Citroen pidurisüsteemidele
20 mm 10-kant padrun Honda Civic õõtshoob
Roostevabast terasest padrunihoidjatega metallsiin
Tootekood: 53669J
, Laoseis: Laos
59,00 €
• K7801M 1/2" impact Sockets 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm
• K7806M 1/2" deep impact Sockets 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm
• To be used with machines
• For maximum safety use clamping springs
• Phosphate finish
• High-performance alloy steel
• Dynamic-Drive™ Profile to protect nuts, screws and tools from unnecessary wear and damage
• High-density polythene case with two-component handle
• Drive standard: DIN 3121-G 12.5 ISO 1174
• Standards: DIN 3129, ISO 2725
• K7806M 1/2" deep impact Sockets 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm
• To be used with machines
• For maximum safety use clamping springs
• Phosphate finish
• High-performance alloy steel
• Dynamic-Drive™ Profile to protect nuts, screws and tools from unnecessary wear and damage
• High-density polythene case with two-component handle
• Drive standard: DIN 3121-G 12.5 ISO 1174
• Standards: DIN 3129, ISO 2725
Tootekood: D-DD/S20
, Laoseis: Laos
116,00 €